JET series jet self-priming electric pump

Product overview

First, JET series jet self-priming electric pump (hereinafter referred to as electric pump), by the motor, water pump, mechanical seal three parts. This series of electric pump adopts the unique structure of centrifugal impeller, radial guide vane and jet pipe. The principle is that the pressure first passes through the nozzle to create a vacuum, and then the low-water level liquid is sucked into the pump inlet and discharged by the pump. A single end mechanical seal structure is adopted between the pump and the motor, and the rotating water retaining ring on the shaft plays the role of auxiliary water dumping and isolation. An "O" ring is used for static sealing at the fixed end seal.

Second, intelligent jet pump function introduction:

1, intelligent mode 2, power delay 3, water shortage protection 4, water reload

5, pressure display 6, water tower water supply 7, overcurrent protection 8, anti-freeze mode

Product use

This series of electric pump has beautiful appearance, compact structure, simple installation and convenient use. It is an ideal household pump with high efficiency, energy saving, safety and environmental protection. It is widely used in farmland, garden irrigation, tap water pressurization, water tower water supply and well water lifting and other occasions.

Working condition

The electric pump should be able to work continuously under the following conditions:

1. Transport medium is water, medium temperature :<40℃;

2. The PH value of the medium is between 6.5 and 8.5;

3. Ambient temperature :<45℃;

4. The volume ratio of solid impurities in the medium is not more than 0.1%, and the particle size is not more than 0.2mm; 5. The power supply is single-phase AC 220V150Hz, three-phase AC 380V150Hz(ordinary model) fluctuation range rating +10%.